Step 1.
Open the Control Panel on your desktop.

Step 2.
Inside the Control Panel open Java.
(You might have to click on the Security tab and then request access to the Java control panel at the bottom of that security-related window.

Step 3.
Under Java/Security, click the security tab.
You will see the Java version information in the Java Control Panel.

Step 4.
Press the YES button to have the JAVA verifier check the JVM for you.
You will be told if any security problems exist.

Step 5.
Press the OK button and the Close button to verify Java and exit the JAVA Control Panel.

Step 6.
Close the Control Panel.
You should now be able to run the spu2-x version 1.8.1 emulator.

Step 7.
Look for a file named spu2-x.
jar under the C:\Program Files\spu2-x directory.
The spu2-x version 1.8.1 emulator will run properly from this .jar file.

Step 8: Run the spu2-x version 1.8.1 emulator.
A command prompt window will appear and a Windows alert will sound asking if you want to allow it to make changes. This is normal, so give permission.

Step 9.
On the left side of the command prompt window you will see a window that says “spu2x – version x.
x (build yy)” followed by some version numbers and a (build yy) number.

Step 10.
If things are working properly, you should see a little menu that includes the following options shown at the top of the menu as “File + Emulator.
”

Step 1: Start your system and go to “My Computer”.
Find the hard drive icon and install the game. The default path to install the game will be C:\Program Files\KONAMI\Pro Evolution Soccer 2011. For example:

Step 2.
Go to KONAMI\Pro Evolution Soccer 2011 and create a desktop shortcut, for example: “C:\Program Files\KONAMI\Pro Evolution Soccer 2011\pes_2011.
exe”

Step 3.
Create a desktop shortcut of the shortcut you have just created.
For example.
“C:\Users\user name\Desktop\pes 2011.lnk”

Step 4.
If a new shortcut is generated in the start menu it should have something [USB Mass Storage Device] in its name.
Remove everything except the last part of the name.
For example: “pes 2011”

Step 5.
Start the game.
The shortcut on your desktop should open the PES 2011 Launcher.
If it doesn’t then go to your computer and find the new shortcut and click on it.

Step 6.
If it still doesn’t work, then try ending the task of PES 2011.
Find the game using your computer and right click on the process and end it in the end process tab.

Step 7: Now go to the start menu on your computer and look for PES 2011 under KONAMI.
Start the game and if everything goes right, you should see the PES 2011 Launcher. Check if the game is loading by pressing “F1”. Enter the short-cut location and make a new shortcut of it and try running it on your desktop. This time it should open the PES 2011 Launcher.

Step 8.
Congratulations if it worked! If not then this is an issue with the game.
We suggest you contact KONAMI support.

Step 9.
Make sure you have updated everything at least once.
It includes steam, anti-virus, graphics card drivers etc.

Step 10.
If you have some extra know-how take a look at the files, installers and their path’s.
Like for example ar\e.ini to fc\data.
You might have missed something.

Step 1.
Decide to Talk When both you and your loved one are in an anxiety-free environment.
This is not the moment to have a discussion.
Your loved one should be calm, centered and open.

Step 2.
Establish Clear Boundaries Give your loved one an idea of what to expect.
You are not looking for a “yes or no” response.
Explain that you want to talk about the most important aspects of their addiction—and they will have a say in the discussion, but you must be the one to initiate the conversation.

Step 3.
Listen to Their Side of the Story Be prepared and willing to hear their point-of-view.
You are not there to judge, but to help.
No one uses drugs and/or alcohol to cause harm to themselves or others. Issues around abuse, for example, can be complex.

Step 4.
Set Boundaries for them Your loved one has proven that he or she does not have control over his or her addiction—at least at the present time.
By offering some boundaries, you can offer them a chance to regain control—a chance to succeed.

Step 5.
Understand Your Role as a Non-Addicted Counselor/Support Person Now is not the time to talk about drugs and alcohol.
Consider what kind of role you would like to take on in your loved one’s life, and how best you can support them.
Do not put your loved one in the position where they feel they need to say they are “fine” or “ok”—but rather accept their nonverbal cues that they want help.

Step 6.
Avoid Making This a Bragging Session of What They Would Do If They Were Addicted Acknowledging that you would not want to be in the situation is a great place to start.
Explain that you would understand if they felt the same way about being in their addiction.

Step 7.
Get Curious and Confident Again, avoid the desire to judge.
True compassion will elude you if you are not curious about your loved one’s addiction, their background and even their current situation.
By forming these undifferentiated responses, you will be able to immediately begin a conversation with your loved one and focus on their needs.

Step 8.
Insert Yourself into Their Sub-Narratives In the future, you might have to walk away from a conversation if you feel it is becoming too negative.
It may also be helpful to try and reframe the conversation around more positive events in your loved one’s life, and acknowledge the same in theirs.

Step 9.
Take Time Out Deep breaths… With a support person, take some time-outs from the conversation to reflect on you, your loved one and your intervention goals.

Step 10.
Avoid Comparisons Incorporate mutual friends into the conversation, be it cousins, siblings or brothers-in-law.
Talking about others outside the setting of your loved one’s addiction might help that person feel more positive.
Give examples of how others had felt when they were in those situations.

Step 1.
Getting the cabinets clean and prepped is the most important part of a DIY kitchen remodel.
After that, it’s just a matter of adding the right kind of details.

Step 2.
If your cupboards were built before 1978, have a professional test for lead-based paint, since chipping it can release harmful levels of the metal into your house.

Step 3.
Liberally sand off blemishes with a power sander, then wipe the cabinets down with mineral spirits.
Wipe them again after they’ve dried.
Sand down the divider between the doors and drawers and around any hinges, which have probably deteriorated with age.

Step 4.
With a strong cleaner like Simple Green, scrub down the inside of the cupboards and the bottom of their drawers.

Step 5.
Leave them to dry, then check all the screw holes.
If they’re full of wood filler, fill in with a filler of your choice (try Elmer’s).

Step 6: With an angled paintbrush and a mix of 1/3 latex paint tinted to match the cabinets (try Minwax stain in “Early American”), and 2/3 Zinsser SealCoat, paint any spots that were covered by drawers or doors, as well as the inside of any cupboards where there are gaps between shelving.
Let dry.

Step 7.
Tighten the screws for the doors and drawers with a screwdriver.
(Photo 7) If your hinges have all corroded, restain them with Zinsser B-I-N or equivalent.

Step 8.
Using finishing nails, attach a set of old curtain rods to the sides of each kitchen cabinet.
I bought a pair at Goodwill for $1.50 and cut them down with a hacksaw.
Use more nails to hang the old drapes on the rods. (Photos 8–11)

Step 9.
Apply a coat of primer to all your cut curtain rods, let dry, and then paint them whatever color you want.
I chose matte metallic silver.

Step 10.
Crank open old shutters and cut them in pieces.
Then apply an even coat of matte metallic silver spray paint to slightly distress the edges.
Use finishing nails to hang the shutter panels over the window above the sink. (Photo 12)

Step 1.
Set up the basic page and bar chart

Step 2.
Add Our Horizontal Bar Chart Anchor and Another Vertical Bar Chart Same Width/Height Using Our Vertical Bar ( Anchor)

Step 3.
Add the Line Chart Anchor and Another Vertical Bar Chart Same Width/Height Using Our Vertical Bar ( Anchor)

Step 4.
Add Song Title and Artist Using Our Horizontal Bar Anchor Combination

Step 5.
Add Date of Release Using Our Horizontal Bar Anchor Combination

Step 6.
Add Embed Audio Player on Top of Same Vertical Bar and Cover Part of the Vertical Bar Rarely Used to Show Vertical Bar Chart

Step 7.
Add Song Amount Downloaded Column Using Our Horizontal Bar Anchor Combination as a Spacer and Separator Using Our Bevel Effect

Step 8.
Add Song Amount Downloaded as Percentage Using Our Horizontal Bar Anchor Combination as a Spacer and Separator Using Our Bevel Effect

Step 9.
Add Song Amount Downloaded as Percentage Using Our Horizontal Bar Anchor Combination as a Spacer and Separator

Step 10.
Repeat the Songs Column Set Up Six More Times For Each Song in the Set List List Column, But Use a Different Media Type for Each Song

Step 1.
Test for suitability by letting your tarantula crawl around on one of the hands in a pair of white cotton gloves.
This will give it some protection from your hands and any chemicals used to clean its container, should you approach it directly.

Step 2.
Move your hand so that the tarantula can enter the glove.
If it climbs all or most of the way inside the glove, that is a good sign that it may be ready to change homes.

Step 3: Cover the floor of a new container with 1 to 2 in of soil.
Then add a shallow layer of peat moss and crushed coconut shell, ideally pre-moistened before adding to this layer.

Step 4.
Make a hole in the soil, enclosing the tarantula with your index finger and thumb.
Let it work its way out of the soil on its own with the help of its sense of touch, if needed.

Step 5.
Drop the tarantula in and carefully cover it with soil.
Then replace the new container’s lid and tape it securely to keep the tarantula inside.

Step 6.
Feed it.
Tarantulas prefer live insects and can be rescued from their cannibalistic ways (and from being prey) by breeding crickets as food for them.

Step 7.
A week after its move, it may shed its exuviae (old exoskeleton).
This could be a sign that things are going well.

Step 8.
After two or three weeks, try blowing gently on its abdomen with nothing in front of you.
You are trying to make it nervous so that it will be prepared to run away if necessary.
Repeat every few days until it runs. Remove your finger to see if it comes back.

Step 9.
Once its running has improved, watch it from a distance to see if it can run away.
It might near a leaf with a white plant tag hanging on it.
If so, remove your finger and see if it goes to the spot and stays there where you can pet it.

Step 10.
When you are able to touch it from a distance, move your hand around the leaf.
Try to make it nervous, perhaps by doing quick lunges toward the tarantula before backing away.

<b>Step 1.
Season your pork chop.>
This may seem counterintuitive, but many people I know find that a pork chop tastes best when it’s not covered, completely, in some sort of salt-and-pepper rub.
Maybe it has something to do with the bone—maybe you want it to season the bone, too. Either way, I find that an even dusting of salt and pepper is the most flavorful starting off point for the cooked chop.

<b>Step 2.
Preheat your oven.>
Set a cast-iron pan on medium heat.
Enough to get it legitimately hot, but still not so hot that the olive oil you’re about to add will smoke. While you wait for that to happen, pat the sides of your pork chop dry. (This helps to achieve a good sear.)

<b>Step 3.
Add the olive oil and pork chop.>
Add just enough to coat, and then add the pork chop.>
No crowding—you want an oven-to-cooking surface ratio that works out to at least one square inch of cooking surface per ounce of meat.

<b>Step 4.
Cook the pork chop, oil side down.>
Don’t move it! I know that’s how you’re used to doing it at home, but it’s actually pretty important that you don’t turn the chop until the bottom half is done.
This will probably take 3 to 4 minutes.

<b>Step 5.
Flip the pork chop.>
When it’s brown and crusty on the bottom, it’s time to flip.>
Flip the chop and brown for another 3 to 4 minutes.

<b>Step 6.
Get a pan out of the oven.>
Then, crack a whole bunch of eggs in it—just drop them in from about a foot above the pan.

<b>Step 7.
Cook the eggs.>
Cook the eggs as you like ’em, but I personally think this one just needs to cook until the whites are no longer translucent (about 3 minutes), then place them on top of the cooked pork chop and toss on cooked broccoli.>
This is now an omelette-style situation.

<b>Step 8.
Glaze with the pan sauce.>
The little bits that browned in the pan immediately after you seared the pork chop? Combine that stuff with a bit of apple cider vinegar, fresh herbs, and maybe some ketchup to add a little color.

<b>Step 9.
Eat the pork chops and broccoli and the eggs.
The broccoli gets cooked by the residual heat from the pork chop, and the concoction will glaze everything to perfection.>

<b>Step 10.
Repeat.>
This exact dish hasn’t been replicated at home more than twice, but it could definitely be made over and over again.
You could even pair it with pasta or potatoes if you felt so inclined. And really, who doesn’t?