How to Get a Hub and Spoke to Dual Adapters

2 inch thick
Step 1.
Take a Plug Tap and two Plug’s in correct phase.
Wire them together.
(Notice the RED goes to the RED and the GREEN goes to the GREEN.)
2 inch thick
Step 2.
Insert the Plug Tap into a outlet strip or surge protector strip.
You may want to check to see if you have neutral or hot wires coming out of the strip or surge protector.
If your in a outlet strip then the Neutral and Ground (Neutral) are going to be one set of wires and the hot wires another set. If you find the above to be true then insert a plug on each set of wires coming from the first two outlets. If you find that the Neutral and Ground are separate
4 cloves garlic
Step 3.
Add two more outlets on a another outlet strip and run the separate Neutral and Ground wires to the next strip.
Now use the Unused hot
lump sum payment
Step 4.
Now you should have outlets on each outlet strip.
Now take the other two plugs in correct phase and see if they will fit your wall adapters.
if so then use the you just made a removable plug. If not then go to step 5
go
Step 5.
Cut or trim the plugs in the center so that they will fit the wall outlets.
(Warning.
If you cut them to short it may be a fire hazard.)
salad
Step 6.
Take this newly created plug and Plug it into the first outlet on the first strip.
Take the other end and plug it into a wall plug that is on the outside of the home.
meal
Step 7.
Run the power into Hub from the second outlet on the outside of the house.
Use a power cord or good CAT5 cable to run outlets inside the house.
bacon
Step 8.
Do the same for other hub and spoke modules.
( Notice the RED goes to the RED and GREEN goes to the GREEN.)
raw garlic
Step 9.
Install 1 Hub in the center of the house and install hub and spoke modules along the way to the outside.

blog
Step 10.
To run a set of outlets upstairs you can use a power cord or good CAT5 cable to the outlets on the first floor.

blog

How to insert a new partition:

1
Step 1.
Select the partition where you want to add a new partition to.
Then right click on the partition and select “Resize/Move Partition”, which appears as the second item from the top in the drop-down menu.
(If you just want to shrink the partition, don’t add a new one.)
sea salt
Step 2.
The “Resize/Move Partition” dialog will appear and ask if you want to add a new partition or resize the existing one.
Please select “Add” from the drop-down menu to create a new partition.
2 tbs olive oil
Step 3.
The “Create Disk Partition” dialog will appear and let you choose the size of the new partition to be created.
You can click on the “Advanced” button to set a Custom value for the size of the partition in the Case 1.
Set size in MB or Case 2: Specify size in GB and Bytes box, but if you want to resize the partition to be exactly 5 GB, please type “5041648”, which is 500 MB x 1024 MB (1 GB =
eat
Step 4.
When “Do you want to use the selected partition as the last partition?” appears and you check “No”, the Add Partition dialog will then pop up and tell you how much free space is left on your disk if you resize or shrink the partition.
You can also set a letter for the new partition.
2 tbs olive oil 4 slices gluten
Step 5.
When you are about to create the partition, please ensure you have checked “Perform a quick format…” before clicking “OK”.

blog
Step 6: To check the new partition has been created, go to “Disk Management” from the lower pane and then double click to expand the disk drive.
If a new partition has been created, you will then see the new partition as well.
go
Step 7.
To format the new partition, please right click on it and select “Format” from the drop-down menu.
After that, you can follow the instructions and create a label for the new partition.
try
Step 8.
The new partition is now ready for you to use.
You can also access it through My Computer and then remove the old partition from the partition list.
traditional industry vehicles
Step 9.
To open the new partition, you can right click on the partition and choose “New Simple Volume” from the drop-down menu.
Now you can follow the instructions under Step 1: Select the partition in “Step 2: The ‘Resize/Move Partition’ dialog will appear.” in this tutorial to format the newly added partition.
recipe
Step 10.
Now you can choose the letter and format of the new partition you want to create.
The “Create Disk Partition” dialog will appear and you can click on the “OK” button to create the partition.
2 inch thick

How to install the Google Earth Downloader plugin in Mozilla Firefox

shrimp
Step 1.
Download the plugin here.
Click on the Download plugin button and Firefox will prompt you to go to the next step.
go
Step 2.
Select the Open file button.
This will help you get the plugin downloaded, and saved in your desired location.
2 cloves garlic
Step 3.
The next page will prompt you to Open or Save the file.
To add the plugin in Firefox, select the Open option.
employee
Step 4.
The file will now open.
Firefox will then prompt you for an installation location for the extension.
Locate the place where you want to save it and select Install Now.
tofu
Step 5.
You will then be asked to restart Firefox.
Once you restart, go to the location where you placed the plugin and you should find a Google Earth downloader folder with a Firefox icon.
go
Step 6.
Click on the Firefox icon, and it will open the plugins window.
Click on the Activate Plugin button to activate the plugin.
Now you can select the Plugins button and then click on the Google Earth Downloader menu.
serves 4
Step 7.
There you’ll have to pick where you want to download the Google Earth image, and what part of the world you are interested in.

freshly ground black pepper
Step 8.
Click on the Google Earth Downloader menu and click on the Make a KML file of the current map section.

c
Step 9.
The tool will automatically transfer the image to your desired location.
To see the newly downloaded Google Earth image, go to your Downloads folder in Windows Explorer and open the image file.
go
Step 10.
Right click on the Google Earth Downloader tool and select the Internet shortcuts menu.
Click on the Open a new tab with icon to open up a new tab in Firefox that instantly has the downloaded KML file in it.
sandwich

How to Make a Nintendo Switch Case

15 mins
Step 1.
Collect All the Materials Show All Items
tomato
Step 2.
Draw the Case Show All Items
blog
Step 3.
Cut It Out Show All Items
use bitcoinethereum mining
Step 4.
Fold the Pieces Show All Items
1
Step 5.
Put It Together Show All Items
need
Step 6.
Add the Switch Show All Items
spinach salad
Step 7.
Add the Accessories Show All Items
sandwich
Step 8.
Enjoy Show All Items
spinach
Step 9.
Outro Show All Items
blog
Step 10.
Addendum/Update Show All Items
spinach salad

How to Test Anything, Part 1: Maximize Learning, Minimize Unexpected Consequences

c
Step 1.
Write down what you want to test, and list all the expected outcomes and their relative probabilities.

freshly ground black pepper
Step 2.
List all possible variations.
They may be obvious, or they may be nearly invisible.
If they are hidden, check all the places that might be relevant.
bowl
Step 3.
Choose a variation, either at random or based on judgment.
First identify preconceptions that may bias the test.
If you know the result, you have once raised a barrier to learning (your own inability to see reality).
ensure
Step 4.
Measure the metric(s) of interest, and document your reasoning.
Then measure everything else.
Document your reasoning for everything else.
define neural networks
Step 5.
Document again.
You need to be reminded that you remembered to measure what you thought you were measuring.
need
Step 6.
Analyze the results.
Learn to tell when you are learning as fast as possible, and when you need a better hypothesis or additional variations of the test.
need
Step 7.
Revise your model.
Your models, not reality, are the unbiased sources of your learning.
One of us (DHH) has suggested that the world does indeed need more anthropomorphized quadratic equations.
shrimp
Step 8.
If there are connections between what you are testing and other areas of interest, consider parallel tests in those areas.

serves 4
Step 9.
Share what you have learned as widely as possible.
You can take steps to reduce the risk of negative outcomes, if you learn enough.
coarse salt
Step 10.
Set up a process to follow the most important results even after you have forgotten about them.
If no one is interested, announce the results and explain why they are important to people who care.
¾ cup fresh lemon juice

How to install Unbounce HTML Kits WordPress plugin

try
Step 1.
After completing the free registration process for Unbounce, you will be taken to the Unbounce landing page where you will have the option to create your account or log in as a registered user.
If you already have an Unbounce account, then simply login and select the platform you want to start from; otherwise, if you are a new user, then click on the Get Started button to register your account.
forval
Step 2.
After registering your account with Unbounce, download your Kit to the WordPress site.
You might be prompted to log in or display the download button.
If you are prompted to log in, then do so.
sandwich
Step 3.
Once you have downloaded your Kit, then you will find it in the WordPress admin area under the Downloads section.
Click on the Follow the Instructions to Install option, shown in the following screenshot.

c
Step 4.
After log in to the WordPress admin area from your browser, navigate to the My Account | Billing section.
At this point, you will find an invoice for the account listed as Credit Card Upload Document.
Click on the Customize button to edit your account information and then click on the Upload your credit card document link as shown in the following screenshot:
location button
Step 5.
Follow the simple on-screen instructions to upload your credit card billing invoice for the Kit.
The Unbounce Kit will be activated upon successful payment.
Then, click on the Return to your Existing App button to start using your new Unbounce Kit in WordPress.
forval
Step 6.
Your Unbounce Kit will appear in the Dashboard area under the Installed Plugins section of the WordPress admin area.
If you need to enable it, then hover over the Enabled checkbox of your Plugin and click on the Enable link, which is highlighted in the following screenshot:
need
Step 7.
Now, navigate to the Installed Plugins section from the WordPress Dashboard and select the Unbounce Plugin from the list.
Here, you will then find the option to configure the Plugin settings, which include modifying the Template URL, Theme, Logo, and Branding options, as shown in the following screenshot.

2 cloves garlic
Step 8.
By default, Unbounce uses the theme style.
css file to insert the Theme metadata into the layout and it also adds some content under the WooCommerce product details, such as price, stock and SKU.
2 large sweet yellow onions
Step 9: To import the content from your Unbounce Kit, you need to make sure that the Bundle settings option is enabled by navigating to the Installed Plugins section and enabling the Bundle for this Template button.
need
Step 10.
Next, pick the Bundle that includes the Unbounce Kit you want to import in your WordPress site and then click on the Import Now button.

blog

How to enter and win?

code
Step 1.
Follow @blckrifleco on Instagram.

2 large sweet yellow onions
Step 2.
Comment below with why you are the biggest fan.
The more creative, the better! Check out the photo above for inspiration.
The winner will be chosen randomly from the best comment and announced on Monday, February 11. Good luck!
tomato
Step 3.
Share the image below on Instagram and tag @blckrifleco to be entered to win the January BBQ Box.
You can choose one image to tag or use both for maximum chances to win.
Be sure to use the hashtag #BBQBoxBlkRifleCo when sharing.
shrimp
Step 4.
Enter the same contest on Instagram.
Good luck!
c
Step 5.
Follow us on Facebook and Instagram to stay tuned for future contests.
Get the chance to win a free box of Black Rifle Coffee in your area!
c
Step 6.
Purchase a box.
Get it delivered to your door.
Enjoy!
tomato
Step 7.
Tell your friends.
The more people order, the better it is for you! If you like coffee, help us get more into your hands!
need
Step 8.
Tell us how you enjoyed it! Use the hashtag #BlackRifleCoffee.
We really love it when our fans talk about us.
bacon
Step 9.
Use our hashtags on all your posts (and there’s more, look in the footer).
The more people that see us the better.
c
Step 10.
Tell your favorite coffee shop they should sell our coffee.
It’s amazing! We will send them a bean for free.
c

How to Edit CSS in the Divi Builder

pem
Step 1.
Start by adding a new module to your page, open the module and then click on the CSS tab.
This will take you to the Style Editor in the WP Customizer.
You can then start creating your CSS by typing in the large field where it says “Default.”
super
Step 2.
Before you post any changes, I highly recommend going to the “Preview Styles” section at the top of the Style Editor.
Here, you can change the preview of your edits to see how they will look on different sized screens.
spinach
Step 3.
Next, you want to click on the Divi > Theme Options link below.
This will take you to the Divi Theme Customizer.
From here you can play around with the CSS preview under the “Custom CSS” tab. This is very helpful in getting a real sense of how your changes will appear.
docker
Step 4.
Once you are satisfied with what you have done, click on the “Save and Publish” button.
This will take you back to your editing screen where you can save all the CSS changes.
tofu
Step 5.
You can take a look at the CSS for the module you just edited by selecting the “Live View” option at the top of the page.

tomato
Step 6.
Next, you can change the CSS in the widget section of any module.
Load the module you want to edit, then click on “Custom CSS” under the Appearance tab.
You will be able to access the code here as well.
code
Step 7.
Sometimes you will want to change the CSS for an entire row or a column.
You can edit the CSS for these elements by first clicking on the grey CSS selector at the top of the row or column and then editing the CSS code to your liking.
try
Step 8.
Another way to edit CSS on a per row or column basis is by first clicking on the grey CSS selector at the top of the row or column.
From there, you can select the row or column by clicking on the red highlighted numbers next to “Select Row” or “Select Column”.
coarse salt
Step 9.
You can add custom CSS to the individual modules.
In the module you want to edit, click on “Layout Options” underneath the module title at the top of the module and then click the “CSS” tab on the popup that appears.
You can put your custom code in here.
lump sum payment
Step 10.
To add custom CSS to an entire section, click on the grey CSS selector next to the section title at the top of the section.
You will then see the name of the section, such as “Footer 1”.
Select the section name and you will be able edit the CSS for the entire section using the same steps outlined above.
go

How to create a data set for future predictions

tomato
Step 1.
Modify the existing Column function by adding the YTD argument, which takes the same input that the Month and Year arguments receive.
Again, note that the first instance of the Column function has no arguments because it contains the logic that was in the original Excel worksheet you imported.
sea salt
Step 2.
Create a new iteration of the IF function that returns 2016 when the original Column function argument is greater than 5,000.

tomato
Step 3.
Use the greater-than operator (>) on the result of the new Column function.
This operator will return a value of false for the second iteration of the Column function.
funds
Step 4.
Number the rows using the Auto Number function and number the columns using the Custom List 2 function.
Each time a custom list is imported, it retains its numbering scheme, so you can continue to use a single list to number every column.
steering wheel button
Step 5.
Add the IF function that returns the correct values for values that are less than or equal to 5,000.
This will number the columns using the custom list 2.
c
Step 6.
Add a new column to the end of the table and include text that indicates whether the sales for the month are up or down over last year.

tomato
Step 7.
Add a fourth iteration of the Column function that uses the operator <= to determine whether the sales for the month are up or down over last year.

salad
Step 8.
Use the IF function to generate the text that indicates whether sales are up or down in column P6.
If sales are up, enter Up Else Down.
Otherwise, insert the text Down Else Up.
4 cloves garlic
Step 9.
Use the MIN function to determine the lowest sales value for the year.
This works because dates are interpreted as serial numbers.
Because Excel interprets row 1 as 1/1, this value is actually the minimum for the year.
1
Step 10.
Use the IF function, which returns the text Up or Down based on whether the sales increase or decrease with the MIN function.
This will return the word Up if the sales are up, otherwise, it will return the word Down.
freshly ground black pepper

How to?

spinach salad
Step 1.
Understanding what you are going to achieve.

try
Step 2.
Setting up the playlist and the survey.

need
Step 3.
Creating the Playlist.

contributions
Step 4.
Creating the survey.

try
Step 5.
Customizing the survey.

blog
Step 6.
Creating the report.

vlan999
Step 7.
Scheduling the survey.

tofu
Step 8.
Delivering the survey and report to the right users.

sandwich
Step 9.
Observing the scenarios.

try
Step 10.
Overcoming the limitations.

8